Showing posts with label PHOTOSHOP. Show all posts
Showing posts with label PHOTOSHOP. Show all posts

Lightning Bolts




On a new layer, create a black to white gradient, diagonally from the top left, to the bottom right.




Filters>Render>Differance Clouds




Now invert the image. Cmd/Ctrl+I
You can start to see the lightning




Adjust levels to bring out the lightning, Cmd/Ctrl+L.
In the levels box: slide the black arrow to the right and the middle one to the right too, until it looks nice and clean




Now to add a bit of color:
Go to Hue/Saturation Cmd/Ctrl+U Click the colorize box and slide the Hue till you like the color.




Now to add it to your image:
Just place the lightning on a layer above your image and change the layer blending mode to "screen". Here I duplicated the lightning layer 2x and rotated it a little. Read More...

3d Cube in Photoshop





Start with a square. Here I made a new document 300X300, created a new layer and filled it with a gradient.




Press Crtl/Cmd+T to enter free-transform mode.
Right click/Cmd click... when the dropdown menu appears, select SKEW
Click on the right middle square and drag up until you get your desired angle. Press Enter/return to apply the transformatoion.




Duplicate the layer




Enter free transform again (Ctrl/Cmd+t) Right click and this time select FLIP HORIZONTAL.
Drag out the copy to the left. Hold down the shift key to keep the baselines aligned.
You may also want to make this side a bit thinner by clicking the left middle square (node) and drag it in a little bit.




Create a new layer and make another square and fill it with the same gradient, this time make the lightest color at the bottom left.




This time while in the free transform mode... when you right click/Cmd click select DISTORT
drag each corner until you get a good match. Be sure the corners fit nice and snug. This step will take a bit of practice to master.




Finally select the top of the cube.
Image>adjust>LEVELS slide the middle triangle over to the right to darken up the mid-tones. Repeat for the left side. This step adds more realistic lighting to the cube.




Ta-da A complete cube. Don't limit yourself to just cubes. You can use this effect for all kinds of shapes. You can even construct a cube out of pictures. Just use images instead of the gradients. Read More...

You can quickly create a large number of data sets by creating an external text file that contains all the variable information and loading that file into a PSD document containing variables. One good way to accomplish this is to enter your data into a text file and then export it to a tab or comma-separated file.

The syntax of the external text file is as follows (where each line that starts with "Variable" or "Value" is an entire line by itself in your file):

VariableName1VariableName2 VariableNameN

Value1-1Value2-1 ValueN-1

Value1-2Value2-2 ValueN-2

Value1-MValue2-M ValueN-M

All the variable names are listed on the first line, in the order that the values are given in subsequent lines. Each subsequent line represents one data set, with the values for each variable given.

External Text File Syntax Elements

Either a comma-separated (CSV) or a tab (tab-delimited) file that separates each variable name or value.

A newline that ends each data set and can be a line feed, carriage return, or both.

"true" and "false"

Allowed values for a visibility variable.

Spaces

Around the delimiter are removed when parsing the file; between words in a value string (e.g., two of a kind) are maintained and leading and trailing spaces are maintained if enclosed in double quotes (e.g. , "one kind ").

Double quotes

Can be part of a value if preceded by another double quote (e.g. , ""B"" would be "B" in the data set).

If or is part of the variable value, then the entire value must be enclosed in double quotes.

All variables defined in the PSD document must be defined in the text file. An error will be displayed if the number of variables in the text file does not match the document.

Example data set:

Using a template for flowers that holds variables for tulip and sunflower, you can set up a text file that looks like this:

{contents of FlowerShow.txt}

Variable1, Variable2, Variable3

true, TULIP, c:\My Documents\tulip.jpg

false, SUNFLOWER, c:\MyDocuments\sunflower.jpg

false, CALLA LILY, c:\My Documents\calla.jpg

true, VIOLET, c:\My Documents\violet.jpg

To import a data set:

  1. Do one of the following
    • Choose File > Import > Variable Data Sets.
    • Choose Image > Variables > Data Sets.
  1. Click the Import button.
  1. Enter the name of the text file to import.
  1. Set up your import options. There is a check box to use the first column value as the data set name. This is useful if your first variable is an identifier like a name or product number and you want to name your data sets with that value. Otherwise, the data sets are named "Data Set 1, Data Set 2, etc.." There is also a check box to delete all current data sets before importing new data sets.
  1. Set the encoding of the text file or leave as "Automatic."
  1. Click OK.
Read More...

Once you have variables and one or more data sets defined, you can output, in batch mode, images using the data set values. You can output images as PSD files, optimized images, or SWF images.

To process data sets:

  1. Choose File > Export > Data Sets as Files.
  1. Enter a base name for all files generated. You may create your own file-naming scheme if you want.
  1. Click the Choose button to select a destination directory for your files.
  1. Choose data sets to export.
  1. In the Save As text box, choose an export format and set the format-dependent export parameters.
  1. Click OK.

Note: When exporting to SWF format, you can see multiple images in one HTML file. This is useful for quick visual scans. For instance, you can check if text was truncated, or choose a version from multiple data sets you've exported all to one file.

Read More...

To help you organize your actions, you can create sets of actions and save the sets to disk. You can organize sets of actions for different types of work--such as print publishing and online publishing--and transfer sets to other computers.

Tip iconAlthough ImageReady doesn't allow you to create sets, you can manually organize actions in the ImageReady Actions folder. For example, if the Actions palette contains too many actions, create a new folder inside the ImageReady Actions folder and move less-used actions from the ImageReady Actions folder to this new folder. The relocated actions are removed from the palette until you return them to the ImageReady Actions folder.

To create a new set of actions:

  1. In the Actions palette, click the New Set button Create a New Set button , or choose New Set from the palette menu.
  1. Enter the name of the set, and click OK.

To move an action to a different set:

In the Actions palette, drag the action to a different set. When the highlighted line appears in the desired position, release the mouse button.

To rename a set of actions:

  1. In the Actions palette, choose Set Options from the pop-up menu.
  1. Enter the name of the set, and click OK.
Read More...

Actions are automatically saved to the Actions Palette folder in the Adobe Photoshop or Adobe ImageReady CS Settings folder. If this file is lost or removed, the actions you created are lost. You can save your actions to a separate actions file so that you can recover them if necessary. You can also load a variety of action sets that are shipped with Photoshop (Photoshop).

Note: The default location of the Adobe Photoshop CS Settings folder varies by operating system. Use your operating system's Find command to locate this folder.

To save a set of actions:

  1. Select a set.
  1. Choose Save Actions from the Actions palette menu.
  1. Type a name for the set, choose a location, and click Save.

You can save the set anywhere. However, if you place the file in the Presets/Photoshop Actions folder inside the Photoshop program folder, the set will appear at the bottom of the Actions palette menu after you restart the application.

Tip iconPress Ctrl+Alt (Windows) or Command+Option (Mac OS) when you choose the Save Actions command to save the actions in a text file. You can use this file to review or print the contents of an action. However, you can't reload the text file back into Photoshop.

To load a set of actions:

Do one of the following:

    • Choose Load Actions from the Actions palette menu. Locate and select the action set file, and then click Load. (In Windows, Photoshop action set files have the extension .atn.)
    • Select an action set from the bottom of the Actions palette menu.

To restore actions to the default set:

  1. Choose Reset Actions from the Actions palette menu.
  1. Click OK to replace the current actions in the Actions palette with the default set, or click Append to add the set of default actions to the current actions in the Actions palette.
Read More...

Sometimes a long, complicated action does not play properly, but it is difficult to tell where the problem occurs. The Playback Options command gives you three speeds at which to play actions, so that you can watch each command as it is carried out.

When working with actions that contain audio annotations, you can specify whether or not the action will pause for audio annotations. This ensures that each audio annotation completes playing before the next step in the action is initiated.

To specify how fast actions should play:

  1. Choose Playback Options from the Actions palette menu.
  1. Specify a speed:
    • Accelerated to play the action at normal speed (the default).
    • Step by Step to complete each command and redraw the image before going on to the next command in the action.
    • Pause For to enter the amount of time Photoshop should pause between carrying out each command in the action.
  1. Select Pause For Audio Annotation to ensure that each audio annotation in an action completes playback before the next step in the action is initiated. Deselect this option if you want an action to continue while an audio annotation is playing.
  1. Click OK.
Read More...

You cannot record the painting and toning tools, tool options, view commands, and window commands. However, you can insert many nonrecordable commands into an action using the Insert Menu Item command.

You can insert a command when recording an action, or after it has been recorded. An inserted command doesn't execute until the action is played, so the file remains unchanged when the command is inserted. No values for the command are recorded in the action. If the command has a dialog box, the dialog box appears during playback, and the action pauses until you click OK or Cancel.

Note: When you use the Insert Menu Item command to insert a command that opens a dialog box, you cannot disable the modal control in the Actions palette.

To insert a menu item in an action:

  1. Choose where to insert the menu item:
    • Select an action's name to insert the item at the end of the action.
    • Select a command to insert the item at the end of the command.
  1. Choose Insert Menu Item from the Actions palette menu.
  1. With the Insert Menu Item dialog box open, choose a command from its menu.
  1. Click OK.
Read More...

You can exclude commands that you don't want to play as part of a recorded action. In Photoshop, you must be in list mode--not button mode--to exclude commands.

To exclude or include a command:

  1. To expand the listing of commands in an action, click the triangle to the left of the action you want to work with.
  1. Click the check mark to the left of the specific command you wish to exclude; click again to include the command. To exclude or include all commands in an action, click the check mark to the left of the action name.

When you exclude a command, its check mark disappears. In addition, the check mark of the parent action turns red to indicate that some of the commands within the action are excluded.

Read More...

You can include stops in your action that let you perform a task that cannot be recorded (for example, using a painting tool). Once you've completed the task, click the Play button in the Actions palette to complete the task. You can insert a stop when recording an action or after it has been recorded.

You can also display a short message when the action reaches the stop. For example, you can remind yourself what needs to be done before continuing with the action. Photoshop gives you the option of including a Continue button in the message box. This lets you check for a certain condition in the file (for example, a selection) and continue if nothing needs to be done. ImageReady automatically provides the Continue button.

To insert a stop:

  1. Choose where to insert the stop by doing one of the following:
    • Select an action's name to insert a stop at the end of the action.
    • Select a command to insert a stop after the command.
  1. Choose Insert Stop from the Actions palette menu and choose Insert Stop. In ImageReady you can also click the Insert a Step button at the bottom of the palette.
  1. Type the message you want to appear.
  1. (Photoshop) If you want the option to continue the action without stopping, select Allow Continue.
  1. Click OK.
Read More...

The Insert Path command lets you include a complex path (a path created with a pen tool or pasted from Adobe Illustrator) as part of an action. When the action is played back, the work path is set to the recorded path. You can insert a path when recording an action or after it has been recorded.

Note: Playing actions that insert complex paths may require significant amounts of memory. If you encounter problems, increase the amount of memory available to Photoshop.

To record a path:

  1. Do one of the following:
    • Start recording an action.
    • Select an action's name to record a path at the end of the action.
    • Select a command to record a path after the command.
  1. Select an existing path from the Paths palette.
  1. Choose Insert Path from the Actions palette menu.

If you record multiple Insert Path commands in a single action, each path will replace the previous one in the target file. To add multiple paths, record a Save Path command using the Paths palette after recording each Insert Path command.

Read More...

When you create a new action, the commands and tools you use are added to the action until you stop recording.

To create a new action:

  1. Open a file.
  1. In the Actions palette, click the New Action button New button, or choose New Action from the Actions palette menu.
  1. Enter a name for the action.
  1. (Photoshop) Choose a set from the pop-up menu.
  1. If desired, set one or both of the following options:
    • Assign a keyboard shortcut to the action. You can choose any combination of a Function key, the Ctrl key (Windows) or Command key (Mac OS), and the Shift key (for example, Ctrl+Shift+F3), with these exceptions: In Windows, you cannot use the F1 key, nor can you use F4 or F6 with the Ctrl key.
    • (Photoshop) Assign a color for display in Button Mode.
  1. Click Record. The Record button in the Actions palette turns red Record button (red) .

Important: When recording the Save As command, do not change the filename. If you enter a new filename, Photoshop records the filename and uses that filename each time you run the action. Before saving, if you navigate to a different folder, you can specify a different location without having to specify a filename.

  1. Choose the commands, and perform the operations you want to record.
  1. To stop recording, either click the Stop button, choose Stop Recording from the Actions palette menu, or press the Escape key. To resume recording in the same action, choose Start Recording from the Actions palette menu.
Read More...

Printing a target is for creating a custom profile. Generally, a target document with swatches is supplied as part of a third-party color management software package. When printing a target, you want to turn off all color management in both Photoshop and the print driver. Once the target is printed, it is read/scanned by a third-party measuring instrument to create the custom profile.

To print a target:

  1. Open the color target document in Photoshop.
  1. Choose File > Print with Preview.
  1. In the Print with Preview dialog box, make sure Show More Options is selected and Color Management is chosen from the menu.
  1. In the Source Space area, select Document to reproduce document colors as interpreted by the profile currently assigned to the document.
  1. In the Print Space area, choose Same As Source from the Profile menu.
  1. Click the Print button.
  1. In the Print dialog box (for setting printer options), set the print driver for No Color Management, Color Adjustments Off, or Color Management Off.
  1. Click the Print button.
Read More...

Photoshop is an OLE 2.0 server, which means it supports embedding or linking an image in an OLE container application (usually a word-processor or page-layout program). For example, you can insert Photoshop files and selections into other OLE applications such as Adobe PageMaker, Adobe FrameMaker, and Microsoft Word using copy and paste or other methods.

    • Linking lets you place a link in the OLE container file that refers to the Photoshop file on the hard drive.
    • Embedding lets you insert the Photoshop file into the OLE container file.

Once in the container application, an image can be double-clicked for editing in Photoshop. When closed in Photoshop, the image is updated in the container application.

To link or embed a selection or image in an OLE application:

Do one of the following:

    • Copy a selection in Photoshop, and insert it in your OLE container application using the application's Paste Special command. Refer to your word-processing or page-layout application documentation for more instructions. Pasted selections can only be embedded, not linked.
    • Use your OLE container application's Insert Object command to insert a new Photoshop image or existing Photoshop file as an OLE-embedded or OLE-linked object. Refer to your word-processing or page-layout application documentation for instructions.

To insert an unlinked screen-resolution bitmap into an OLE application:

With the Move tool Move tool , drag a selection to the OLE container application. When you drop the object, it appears as a 72-ppi bitmap, which cannot be automatically updated in Photoshop.

To modify and update a linked or embedded image in an OLE application:

  1. Double-click the linked or embedded image in your word-processor or page-layout application to launch Photoshop (if it is not already running), and open the image for editing.
  1. Modify the image as desired.
  1. Do one of the following:
    • For embedded images, close the file, or choose File > Update or File > Close & Return to application name.
    • For linked images, save and close the file.

Note: You can also modify linked files without first opening the container document. The linked image will be updated the next time you open the document in its OLE container application.

Read More...

The Paths to Illustrator command lets you export Photoshop paths as Adobe Illustrator files. This makes it easier to work with combined Photoshop and Illustrator artwork or to use Photoshop features on Illustrator artwork. For example, you may want to export a pen tool path and stroke it to use as a trap with an Photoshop clipping path you are printing in Illustrator. You can also use this feature to align Illustrator text or objects with Photoshop paths.

To use the Paths to Illustrator command:

  1. Draw and save a path or convert an existing selection into a path.
  1. Choose File > Export > Paths to Illustrator.
  1. Choose a location for the exported path, and enter a filename. Make sure Work Path is chosen in the Write menu to export the path.
  1. Click Save.
  1. Open the file in Adobe Illustrator. You can manipulate the path or use the path to align Illustrator objects that you add to the file.

Note that the crop marks in Adobe Illustrator reflect the dimensions of the Photoshop image. The position of the path within the Photoshop image is maintained, provided you don't change the crop marks or move the path.

Read More...

You can modify existing layouts or create new layouts using the Picture Package Edit Layout feature. Your custom layouts are saved as text files that are stored in the Layouts folder inside the Presets folder. These saved layouts can be reused. The Picture Package Edit Layout feature uses a graphic interface that eliminates the need to write text files to create or modify layouts.

To customize a picture package layout:

  1. Do one of the following:
    • Choose File > Automate > Picture Package.
    • From the File Browser menu, choose Automate > Picture Package.
  1. In the Picture Package dialog box, choose a layout from the Layout menu if you're creating a customizing an existing layout.
  1. Click the Edit Layout button.
  1. In the Picture Package Edit Layout dialog box, enter a name for the custom layout in the Name text box.
  1. (Optional) In the Layout area of the Picture Package Edit Layout dialog box, choose a size from the Page Size menu or enter values in the Width and Height text boxes. You can use the Units menu to specify inches, centimeters, pixels, or millimeters.

Dragging a placeholder to a new location in the Picture Package layout

Dragging a placeholder to a new location in the Picture Package layout

  1. In the Grid area of the Picture Package Edit Layout dialog box, select the Snap To option to display a grid to help you position the elements in the custom layout. Enter a value in the Size text box to change the appearance of the grid.
  1. To add or delete a placeholder, do one of the following:
    • Click Add Zone to add a placeholder to the layout.
    • Select a placeholder and click Delete Zone to delete it from the layout.
  1. To modify a placeholder, select a placeholder and do one of the following:
    • Enter values in the Width and Height text boxes to resize a placeholder.
    • Click and drag a handle to resize a placeholder. If you resize a rectangle placeholder with an image in it, Picture Package will snap the image within the vertical or horizontal placeholder, depending on the way the zone is being resized.
    • Enter values in the X and Y text boxes to move a placeholder.
    • Enter values in the Position and Size text boxes for the positioning and sizing a placeholder.
    • Click and drag a placeholder to the location you want in the layout.
  1. Click Save.
Read More...

To prepare a duotone image for exporting to a page-layout application, save the image in EPS or PDF format (unless the image contains spot channels, in which case you should convert it to Multichannel mode and save it in DCS 2.0 format). Keep in mind that it's important to name custom colors so they'll be recognized by the other application. Otherwise the image won't print correctly--or might not print at all.

Read More...

Because duotones are single-channel images, your adjustments to individual printing inks are displayed as part of the final composite image. In some cases, you may want to view the individual "printing plates" to see how the individual colors will separate when printed (as you can with CMYK images).

To view the individual colors of a duotone image:

  1. After specifying your ink colors, choose Image > Mode > Multichannel.

The image is converted to a multichannel image, with each channel represented as a spot-color channel. The contents of each spot channel accurately reflect the duotone settings, but the on-screen composite preview may not be as accurate as the preview in Duotone mode.

Important: If you make any changes to the image in Multichannel mode, you will be unable to revert to the original duotone state (unless you can access the duotone state in the History palette). To adjust the distribution of ink and view its effect on the individual printing plates, make the adjustments in the Duotone Curves dialog box before converting to Multichannel mode.

  1. Select the channel you want to examine in the Channels palette.
  1. Choose Edit > Undo Multichannel to revert to Duotone mode.
Read More...

Because duotones are single-channel images, your adjustments to individual printing inks are displayed as part of the final composite image. In some cases, you may want to view the individual "printing plates" to see how the individual colors will separate when printed (as you can with CMYK images).

To view the individual colors of a duotone image:

  1. After specifying your ink colors, choose Image > Mode > Multichannel.

The image is converted to a multichannel image, with each channel represented as a spot-color channel. The contents of each spot channel accurately reflect the duotone settings, but the on-screen composite preview may not be as accurate as the preview in Duotone mode.

Important: If you make any changes to the image in Multichannel mode, you will be unable to revert to the original duotone state (unless you can access the duotone state in the History palette). To adjust the distribution of ink and view its effect on the individual printing plates, make the adjustments in the Duotone Curves dialog box before converting to Multichannel mode.

  1. Select the channel you want to examine in the Channels palette.
  1. Choose Edit > Undo Multichannel to revert to Duotone mode.
Read More...

A monitor profile is the first profile you should create. It is absolutely essential for managing color. If what you see on your monitor is not representative of the actual colors in your document, you will not be able to maintain color consistency.

When you calibrate your monitor, you are adjusting it so it conforms to a known specification. Once your monitor is calibrated, a profile is created. The profile describes the color behavior of the monitor--what colors can or cannot be displayed on the monitor and how the numeric color values in an image must be converted so that colors are displayed accurately.

Most profiles only describe the behavior of a device. In addition to describing the monitor's behavior, a monitor profile also contains calibration information, which changes the behavior of the monitor.

To calibrate and profile your monitor, you can use visual calibrators like Adobe Gamma (Windows), Monitor Calibrator (Mac OS), or use third-party software and measuring devices. In general, using a measuring device such as a spectrophotometer along with software can create more accurate profiles. An instrument can measure the colors displayed on a monitor far more accurately than the human eye.

Read More...